PRE-RELEASE
Front section of the wheel housing
| Front section of the wheel housing |
| To remove |
| 1. |
Position the car in the alignment jig.
|
|
| 2. |
Remove
the wheel house frame member
and
the headlight frame
.
|
|
| 3. |
Drill out the spot welds.
|
|
| 4. |
Tap out the part and lift it away.
|
|
| To fit |
| 1. |
Grind all surfaces that are to be welded.
|
|
| 2. |
Apply welding primer to the surfaces that are to be welded.
|
|
| 3. |
Fit the part in place and secure with some clamps.
|
|
| 4. |
Weld the parts in place.
|
|
| 5. |
Fit the headlight frame
and
the wheel house frame member
.
|
|
| 6. |
Grind the welds.
|
|
| 7. |
Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.
|
|
| 8. |
Apply primer to all bare metal surfaces.
|
|
| 9. |
Seal joints and seams with sealant.
|
|
| 10. |
Apply underseal after painting. Use Terostat 9320.
|
|
| 11. |
Apply rust protector after painting. Use Terotex HV 400.
|
|
