PRE-RELEASE
Rear bumper member
| Rear bumper member |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Remove the
Rear bumper shell
.
|
|
| 3. |
Remove the nuts securing the bumper member. If the car has been involved in a collision it may be necessary to cut away part of the member to gain access to the nuts.
|
|
| To fit |
| Note | ||
|
The rear frame member does not have any spacers on older cars. New spacers must therefore be fitted when changing the bumper member. |
| 1. |
Position the bumper member. First, guide the member into the hole at the top left. Fit the nuts securing the bumper member.
|
|
| 2. |
Fit the
Rear bumper shell
.
|
|
| 3. |
Lower the car.
|
|
