PRE-RELEASE
Compressor belt pulley, To remove and To fit, Z18XE
| Compressor belt pulley, To remove and To fit, Z18XE |
Important: The compressor belt pulley and the compressor clutch must be replaced together during a replacement. The service department delivers these parts as a set.
| To remove |
| 1. |
Remove the compressor clutch
see method description, Compressor clutch, To remove and To fit, Z18XE |
|
| 2. |
Remove the compressor belt pulley:
- Remove the circlip (1) - Position the removal adapter on the housing - Use MKM-6319-3 (2) - Pull off the compressor belt pulley - Use MKM-8433 (3) with MK-J-33025 (4) |
|
| To fit |
| 1. |
Fit the compressor belt pulley:
- Press the compressor belt pulley onto the housing - Use MKM-6319-2 (1) - Fit the circlip |
|
| 2. |
Fit the compressor clutch
see method description, Compressor clutch, To remove and To fit, Z18XE |
|
