PRE-RELEASE
Filling and adjusting the compressor oil
| Filling and adjusting the compressor oil |
The A/C system is filled with 120 ml (135 ml for diesel cars from VIN 41019993) compressor oil. A certain amount of compressor oil is always lost when emptying refrigerant and changing components. This amount must be topped up again to maintain the function of the system.
Filling of compressor oil should be done on the high pressure side or through the oil plug.
| Important | ||
|
Use the specified compressor oil. |
||
For information about which compressor oil should be used, see Compressor (170) .
The table below shows how much compressor oil is lost in connection with different types of work on the A/C system:
| Cause of the oil loss | Lost quantity of oil |
| Draining refrigerant | 15 ml |
| Ruptured A/C hose | 30 ml |
| Hose replacement | 15 ml |
| Condenser replacement | 30 ml |
| Evaporator replacement | 30 ml |
| Receiver replacement | 30 ml |
| Expansion valve replacement | 15 ml |
| Compressor replacement* | 50 ml* |
Diesel cars from VIN 41019993
* Note the new compressor is supplied filled with 135 ml of oil. In order not to get too much oil in the A/C system, and in doing so impair cooling, oil must be drained from the compressor before it is fitted. How much depends on how much oil has been lost in connection with the replacement of other components. The A/C system should always contain 135 ml of compressor oil.If only the compressor is replaced then 70 ml of oil should be drained from the new compressor (135-50-15=70). In this way the lost 65 ml is replaced (135-70=65).
Other cars
* Note the new compressor is supplied filled with 120 ml of oil. In order not to get too much oil in the A/C system, and in doing so impair cooling, oil must be drained from the compressor before it is fitted. How much depends on how much oil has been lost in connection with the replacement of other components. The A/C system should always contain 120 ml of compressor oil.If only the compressor is replaced then 55 ml of oil should be drained from the new compressor (120-50-15=55) In this way the lost 65 ml is replaced (120-55=65).
Tightening torque, compressor oil plug 30 Nm (22 lbf ft)
