PRE-RELEASE
Boot lid lock
| Boot lid lock |
| To remove |
| 1. |
Open the boot lid and remove the
Boot lid trim
.
|
|
| 2. |
US/CA
: Loosen the cable from the emergency opening handle.
|
|
| 3. |
Remove the cover from the lock by inserting a screwdriver and undoing the clips.
|
|
| 4. |
Certain cars
: Remove the cover bolt.
Remove the lock's screws 
|
|
| 5. |
Part the connector.
|
|
| 6. |
US/CA
: Remove the emergency opening cable from the bracket.
|
|
| To fit |
| 1. |
US/CA
: Fit the emergency opening cable to the bracket.
|
|
| 2. |
Refit the lock and fit the locks screws.
Certain cars : Fit the cover bolt. |
|
| 3. |
Plug in the connector.
|
|
| 4. |
Fit the lock cover. Make sure all the clips engage properly.
|
|
| 5. |
US/CA
: Insert the cable through the hole in the trim.
|
|
| 6. |
Fit the boot lid's trim and inner opening handle.
|
|
| 7. |
US/CA
: Fit the cable onto the emergency opening handle. Fit the handle to the trim. Check the function of the emergency opening handle.
|
|
| 8. |
Close the boot lid. Check that the lock works.
|
|
