PRE-RELEASE
Rear door, lock button cable
| Rear door, lock button cable |
| To remove |
| 1. |
Remove
Rear door trim
.
|
|
| 2. |
Carefully remove the water barrier from the door.
|
|
| 3. |
Remove the lock button cable.
|
|
| • |
Undo the clips (A)
|
| • |
Detach the opening handle's rod (B) from the clip (C) in the door lock.
|
| • |
Remove the door lock's 3 screws (A).
|
| • |
Push the door lock forward until the cable can be removed (A).
|
| • |
Certain cars
: Remove the cover.
|
| • |
Remove the cable (A) from the door lock.
|
| • |
Drill out the rivet (A).
|
| • |
Remove the cable from the lever (B).
|
| To fit |
| 1. |
Fit the opening cable. Secure the cable to the lever. (B)
|
|
| 2. |
Fit a new rivet (A).
|
|
| 3. |
Fit the cable (A) to the door lock.
|
|
| 4. |
Certain cars
: Fit the cover.
|
|
| 5. |
Put the lock in place.
|
|
| 6. |
Fit the lock screws (A).
|
|
| 7. |
Fit the rod (B) in the clip (C). Close the lock cover for the clip.
|
|
| 8. |
Fit the clips. (A)
|
|
| 9. |
Fit the plastic water barrier.
|
|
| 10. |
Fit
Rear door trim
.
|
|
