PRE-RELEASE
Soft top cover
| Soft top cover |
| To remove |
| 1. |
Open the soft top cover.
|
|
| 2. |
Unplug the connector by holding the antenna cable and at the same time pulling the finger grip towards the antenna cable. Remove the soft top cover.
|
|
| 3. |
Make a note of the position of the rear bolts in relation to the scale. Remove the soft top cover bolts.
|
|
| To fit |
| 1. |
Place the soft top cover in position for fitting.
|
|
| 2. |
Fit the bolts to the soft top cover. Fit the rear bolts in the same position as previously.
|
|
| 3. |
Fit the antenna cable connector.
|
|
| 4. |
Check the fit of the soft top cover. Adjust as necessary, see
Adjustment, soft top cover
|
|
| 5. |
Close the soft top cover.
|
|
