PRE-RELEASE
Side bolster
| Side bolster |
| To remove |
| 1. |
Remove the
C-pillar trim
.
|
|
| 2. |
Side bolster with cable tie
: Cut off the cable tie.
Side bolster with clips : Remove the outer clip using 82 93 474 Removal tool 
|
|
| 3. |
Remove the side bolster inner clip so it comes loose from its fastening.
|
|
| 4. |
Press back the middle part of the bolster while pressing the bolster towards the middle of the car to unhook its middle fastener.
|
|
| 5. |
Unhook the lower bolster fastener.
|
|
| 6. |
Remove the top part of the belt guide.
|
|
| To fit |
| 1. |
Fit the upper part of the belt guide. Make sure the seatbelt strap is not twisted.
|
|
| 2. |
Hook on the lower bolster fastening.
|
|
| 3. |
Insert the middle bolster fastener into its catch.
|
|
| 4. |
Fit the side bolster by pressing on the inner bolster clips.
|
|
| 5. |
Cars with cable tie
: Fit a new cable tie.
Cars with clips : Fit the clip. |
|
| 6. |
Check that the belt is positioned correctly and not twisted.
|
|
| 7. |
Fit the
C-pillar trim
.
|
|
