PRE-RELEASE
Pre-delivery service
| Pre-delivery service |
The materials required for pre-delivery service are packed in the car glove box and luggage compartment.
| 1. |
Remove the
paint protection plastic
from
|
|
| - |
front bumper
|
| - |
rear bumper
|
| - |
door mirrors
|
| - |
sills
|
| - |
boot lid
|
| - |
left MacPherson strut tower in engine bay
|
| 2. |
Remove the protection from the soft top.
|
|
| 3. |
Inspect the underbody for signs of transport damage.
|
|
| 4. |
Remove the
transport protection
from the suspension.
|
|
| 5. |
Remove the
transport protection from the brake discs
and the label from the windscreen.
|
|
| 6. |
Adjust
tyre pressure
(also spare tyre).
|
|
| 7. |
Steel rims:
Fit hub caps.
|
|
| 8. |
Check level of fluids and top up as required
.
|
|
| - |
Washer fluid
|
| - |
Engine oil
|
| - |
Coolant
|
| - |
Brake fluid
|
| - |
Power steering fluid
|
| 9. |
Battery condition test
.
|
|
| 10. |
Fit the
battery cover
.
|
|
| 11. |
Remove the protection from the following
places in the cabin
.
|
|
| - |
Seats
|
| - |
Rear seat
|
| - |
Gear lever/selector
|
| - |
Steering wheel
|
| - |
Floor
|
| - |
Door trim on driver's side
|
| - |
Front sills
|
| - |
Lower dashboard
|
| - |
ICM unit display
|
| 12. |
Remove the VIN label from the side window in the rear door.
|
|
| 13. |
Remove the
separately packed parts
from the glove box.
|
|
| - |
Fit the
cover
over the lock cylinder on the front left door.
|
| - |
Fit
fuse 37 in main fuse box 342 in the engine bay
.
|
| - |
EU:
Place the
Certificate of Conformity
in the owner's manual folder.
|
| - |
CV;
Radio aerial rod, fit.
|
| - |
Fit
Wheel bolt caps
|
| 14. |
Set the clock
and program SID.
|
|
| 15. |
Check the function of the
wash/wipe system
.
|
|
| 16. |
Clear fault codes in all systems.
|
|
| 17. |
Perform
Configuration of dipped beam/front fog lights
.
|
|
| 18. |
Mount number plates.
|
|
| 19. |
Cars with advanced voice recognition:
Activate the correct language for the market. See
Advanced voice recognition
.
|
|
| 20. |
Cars with pinch protection:
Remove fuse F5 in the instrument panel. Fit fuse F5. Carry out
Programming pinch protection
.
|
|
| 21. |
Test-drive
the car.
|
|
| 22. |
Make sure no fault codes have been detected in any of the systems.
|
|
| 23. |
Check that the cover over the data link connector is firmly in place.
|
|
| 24. |
Remove the towing eye and close the cover. Discard the towing eye, there is a new one in the tool compartment.
|
|
| 25. |
Clean the car.
|
|
