Fan motor, removing and fitting
|
|
Fan motor, removing and fitting
|
|
2.
|
Remove the battery cover and the battery coolant pipe.
|
|
3.
|
Pull off the cooling module cable set connector (1)
Remove the cable set
|
|
4.
|
Raise the car
|
|
5.
|
Remove the spoiler shield.
|
|
7.
|
Remove the fan housing
Important: carefully remove the fan housing upwards
2x Undo the bolt (arrows)
|
|
8.
|
Remove the fan motor
3x Unscrew (1)
|
|
9.
|
Fit the fan motor
Instruction: check that the clamp (2) is fitted correctly
3x Tighten bolt - Tightening torque 5 Nm
|
|
10.
|
Fit the fan housing
Important: carefully fit fan housing from above
2x Tighten bolt
|
|
11.
|
Raise the car
|
|
12.
|
Fit the spoiler shield
|
|
14.
|
Fit the cooling module cable set connector
Fit the cable set
|
|
15.
|
Fit the battery cover and the battery cooler pipe.
|
