PRE-RELEASE

Control module, glow plug (596)

To remove

Carry out Diagnostic procedures before replacing control modules .

Important
Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .

Unplug the control module connector.

Remove the control module.

To fit

Fit the control module.

Important
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .

Plug in the control module connector.

Carry out Procedure after replacement of control module .