EVAP canister purge valve (321), B284
|
|
EVAP canister purge valve (321), B284
|
|
1.
|
Remove the upper engine cover.
|
|
2.
|
Unplug the upper connector of the engine control module.
|
|
3.
|
Unplug the 7-pin connector.
|
|
4.
|
Remove the nut and move the cable duct aside.
|
|
5.
|
Detach the brake vacuum hose from the intake manifold.
|
|
6.
|
Remove the bracket holding the crankcase ventilation pipes to the intake manifold.
|
|
7.
|
Unplug the connector from the EVAP canister purge valve.
|
|
8.
|
Detach the hoses from the valve.
|
|
9.
|
Lift up the bracket with the valve and detach the pipe.
|
|
10.
|
Remove the valve from the bracket.
|
|
1.
|
Fit the valve to the bracket.
|
|
2.
|
Attach the pipe to the valve and bracket. Position the bracket.
|
|
3.
|
Attach the hose to the valve.
|
|
4.
|
Plug in the connector of the EVAP canister purge valve.
|
|
5.
|
Fit the bracket holding the crankcase ventilation pipes to the intake manifold.
|
|
6.
|
Attach the brake vacuum hose to the intake manifold.
|
|
7.
|
Reposition the cable duct and fit the nut.
|
|
8.
|
Plug in the 7-pin connector.
|
|
9.
|
Plug in the upper connector of the engine control module.
|
|
10.
|
Remove the upper engine cover.
|
