PRE-RELEASE
Rear secondary air pipe
| Rear secondary air pipe |
| To remove |
| 1. |
Remove the
Front catalytic converter
.
|
|
| 2. |
Raise the car.
|
|
| 3. |
Remove the heat shield of the exhaust manifold.
|
|
| 4. |
Remove the pipe.
|
|
| To fit |
| 1. |
Fit the pipe using new gaskets.
Tightening torque to exhaust manifold: 23 Nm (17 lbf ft) 
|
|
| 2. |
Fit the heat shield on the exhaust manifold.
Tightening torque 10 Nm (7 lbf ft) |
|
| 3. |
Lower the car.
|
|
| 4. |
Fit
Front catalytic converter
.
|
|
