PRE-RELEASE
Dipped beam halogen bulb
| Dipped beam halogen bulb |
| To remove |
| 1. |
LH:
Move the radiator hose to the side and remove the battery cover.
|
|
| 2. |
LH:
Remove the filler pipe of the washer fluid reservoir.
|
|
| 3. |
LH:
Remove the air inlet pipe from the lower battery cover.
|
|
| 4. |
Remove the protective cover of the headlamp.
|
|
| 5. |
Remove the bulb socket by turning it anticlockwise slightly and pulling it out of the reflector.
|
|
| 6. |
Remove the bulb from the bulb socket.
|
|
| To fit |
| Important | ||
|
When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged. |
||
| 1. |
Fit the bulb in the bulb socket.
|
|
| 2. |
Fit the bulb socket by turning it clockwise until secure.
|
|
| 3. |
Fit the protective cover of the headlamp.
|
|
| 4. |
LH:
Fit the air inlet pipe to the lower battery cover.
|
|
| 5. |
LH:
Fit the filler pipe of the washer fluid reservoir.
|
|
| 6. |
LH:
Fit the battery cover.
|
|
| 7. |
LH:
Refit the radiator hose.
|
|
