SAAB WIS ONLINE

PRE-RELEASE

Telematics unit (468), 5D

Telematics unit (468), 5D

To remove

Before removing the unit, perform procedures before removing a control module .


1. Remove the cover.


2. Remove the luggage compartment floor.

3. Remove the telematics unit cover.

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .



4. Unplug the connector.

5. Lift out the telematics unit.


To fit


1. Put in place the telematics unit.

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .


2. Plug in the connector.


3. Fit the telematics unit cover.

4. Fit the luggage compartment floor.


5. Fit the cover.

6. Carry out actions after replacement of control module .

7. Check the function.


PRE-RELEASE