SAAB WIS ONLINE

PRE-RELEASE

Telematics unit (468), CV

Telematics unit (468), CV

To remove


1. Carry out procedures before removing a control module .

2. Remove the front luggage compartment trim .


3. Remove the two bracket bolts.


Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


4. Unplug the connectors.


5. Remove the telematics unit with bracket.


6. Remove the bracket by pressing out the telematics unit.


To fit


1. Fit the bracket to the telematics unit.

2. Place the telematics unit in fitting position.


Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Plug in the connector.


4. Fit the two bracket bolts.


5. Fit the front luggage compartment trim .


6. Carry out procedures after changing a control module .


PRE-RELEASE