PRE-RELEASE
Selector lever housing
| Selector lever housing |
| To remove |
| 1. |
Remove the
Centre console
.
|
|
| 2. |
Remove the air duct.
|
|
| 3. |
Put the selector lever in P position.
|
|
| 4. |
Carefully loosen the cable adjuster using a screwdriver.
|
|
| 5. |
Loosen the gear cable sheath from the gear lever housing. Lift the lock brace.
|
|
| 6. |
Remove the connector from the selector lever housing.
|
|
| 7. |
Remove the selector lever housing.
|
|
| To fit |
| 1. |
Insert the cable and fit the selector lever housing.
Tightening torque 8 Nm (6 lbf ft) 
|
|
| 2. |
Secure the gear cable sheath to the selector lever housing using a screwdriver.
|
|
| 3. |
Check that the selector lever is in position P and that the selector lever on the transmission is in P position. Rock the backwards and forwards until the parking lock engages.
|
|
| 4. |
Secure the cable adjuster using a screwdriver.
|
|
| 5. |
Check the shifting positions.
|
|
| 6. |
Plug in the connector.
|
|
| 7. |
Fit the air duct.
|
|
| 8. |
Fit the
Centre console
.
|
|
