Position sensor, soft top cover open (562o)
|
|
Position sensor, soft top cover open (562o)
|
Only the soft top cover hydraulic cylinder, mounted on the right-hand side of the car, is equipped with a position sensor.
|
2.
|
Remove the cable ties for the hose package and the sensor.
|
|
3.
|
Unplug the position sensor connector.
|
|
4.
|
Move the hydraulic hose to one side.
|
|
5.
|
Use a screwdriver to carefully loosen the position sensor from the hydraulic cylinder.
|
|
1.
|
Move the hydraulic line slightly to one side. Fit the position sensor onto the hydraulic cylinder.
|
Note
|
|
If the position sensor clip has broken, the sensor can be secured with a cable tie.
|
|
|
2.
|
Plug in the position sensor cable.
|
Important
|
|
Cables to hydraulic lines and position sensors must be refitted as they were earlier or there will be a risk of them being damaged when the soft top and soft top cover are operated.
|
|
|
|
|
3.
|
Fit the cable ties for the hose package and the sensor.
|
|
4.
|
Remove the soft top support.
|
|
5.
|
Test the operation of the soft top.
|
|
6.
|
Connect the diagnostics tool and erase any diagnostic trouble code.
|
