PRE-RELEASE
Weatherstrip, rear door
| Weatherstrip, rear door |
| To remove |
| 1. |
Remove the B-pillar trim.
|
|
| 2. |
Remove
the C-pillar trim
.
|
|
| 3. |
Remove the weatherstrip by carefully pulling it straight off the metal flange.
|
|
| To fit |
| 1. |
Fit the weatherstrip with a rubber mallet when it is in its correct position so that the weatherstrip is firmly in place. The joint should be located at the same height as the door stop.
|
|||||||
| 2. |
Fit
the C-pillar trim
.
|
|
| 3. |
Fit the B-pillar trim.
|
|
| 4. |
When fitting a new weatherstrip, remove the installation strap to be able to position the inner tab of the weatherstrip.
|
|
