PRE-RELEASE
BCM / B1016 47
Read the instructions below then start the fault diagnostic procedure.
| B1016 47 |
Control Module not Added
On-board diagnosis
Type of diagnosis:
| Continuous |
Enable criteria:
| Diagnostics run when ignition is ON. |
Fault criteria:
| VIN not programmed in BCM. |
Diagnostic help
See "Procedure after fitting the control module"Diagnostic help
Diagnosis regards:
| Checking if the VIN is programmed in the control module. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
