CIM / B1000 34
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Cannot turn key.
Engine does not start.
Steering column lock not working.
Control Module. Internal Fault
Fault symptom
Cannot turn key.
Engine does not start.
Steering column lock not working.
On-board diagnosis
Type of diagnosis:
Enable criteria:
| Diagnosis is carried out before the control module goes into standby. |
| Diagnosis takes 8 minutes. |
Fault criteria:
| Control module on-board diagnostics has detected a RAM error. |
System reaction to a fault:
| Steering column lock deactivated. |
| The control module does not allow starter motor cranking. |
Diagnostic help
See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.
Diagnostic help
Diagnosis regards:
| To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
