CIM / B3057 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Engine may not start.
Control Module not Added
Fault symptom
Message appears in display.
Engine may not start.
On-board diagnosis
Type of diagnosis:
| Diagnostics carried out after security code is programmed and during "reset". |
Enable criteria:
| Diagnostics runs when key is inserted. |
Fault criteria:
| Security code for CIM not programmed. |
System reaction to a fault:
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
