PRE-RELEASE
Crankshaft impulse sensor, removing and fitting
| Crankshaft impulse sensor, removing and fitting |
| 1. |
Take off the crankshaft impulse sensor cable set connector (1) - expose the cable.
|
|
| 2. |
Remove the impulse sensor (2) from the holder.
|
|
| 3. |
Fit the crankshaft impulse sensor to the cylinder head - tightening torque 8 Nm.
|
|
| 4. |
Connect the cables set connector for the crankshaft impulse sensor - pull on the cable harness.
|
|
