(248-2689 utg.2) Updating the software in the engine control module T8
Symptom: - Engine is difficult to start
- Engine does not start
|
MODIFICATION INSTRUCTION
|
|
Bulletin Nbr:
|
248-2689 utg.2
|
|
Date:
...........
|
December 2007
|
|
Market:
|
ej US/CA
|
|
|
Updating the software in the engine control module T8
|
|
Customer Satisfaction Program 154 55
|
Cars in stock must be rectified before delivery.
A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as possible to have the fault rectified.
Saab 9-3 with engine alternative B207 (not E85) within the following Vehicle Identification Number ranges:
4D/5D:
71000001- 81006734
CV:
76000001- 86000420
|
Note
|
|
Some cars within the Vehicle Identification Number range are not affected. See separate information for the Vehicle Identification Numbers affected.
|
The calibration of the engine control module may result in the engine receiving too much or too little fuel.
Symptom description
- Engine is difficult to start
- Engine does not start
Not affected.
For fitting the modification identity plate:
12 785 148 Modification identity plate
93 160 907 Cleaning agent Motip Dupli, aerosol 400 ml (sufficient for 50-100 cars)
|
Checking the modification identity plate
|
Before proceeding, check box A1 of the modification identity plate. From and including M04 the car's Warranty and Service Book contains the "Table of Modifications". A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local directives require the marking of the car. If the box is not marked, continue as follows.
|
1.
|
Connect Tech2 version 131.500 or later.
|
|
2.
|
Connect to TIS 2000 edition 2007-2 update 1 or later.
|
|
3.
|
Update the engine control module, ECM T8, with one of the following software programs:
|
|
|
•
|
B207E (150 hp):
55566775
|
|
|
•
|
B207L (175 hp):
55566776
|
|
|
•
|
B207R, not US/CA, (210 hp):
55566777
|
|
|
•
|
For cars not normally found on your market:
B207R, US/CA, (210 hp):
55566778
|
|
4.
|
Cars with Anti-Pinch:
Learn Anti-Pinch, see WIS - 8. Body - Doors and locks - Adjustment/Replacement
|
|
5.
|
Set date and time, see WIS - 3. Electrical system - Driver information, main instrument unit and SID - Adjustment/Replacement
|
|
Marking the modification identity plate
|
After carrying out the procedure, mark box A1 on the modification identity plate. From and including M04 the car's Warranty and Service Book contains the "Table of Modifications". Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8" if carried out by the dealer.
|
Fitting the modification identity plate
|
|
Note
|
|
A modification identity plate must only be fitted where local directives require the marking of the car.
|
Fit the modification identity plate in accordance with WIS
9-3 (9440) M04 - General - General - Technical data - Plates and labels
|
Warranty/Time Information
|
See separate information.
