PRE-RELEASE
Control module, fuel pump (697)
Control module, fuel pump (697) |
To remove |
1. |
4D/5D:
Remove the right front seat
.
|
2. |
4D/5D:
Fold up the right corner of the rear carpeting.
|
3. |
Lift up the control module slightly and unplug the connector.
|
4. |
Cut the cable tie holding the control module to the insulation.
|
To fit |
1. |
Position the control module on the insulation and fit a cable tie.
|
2. |
Plug in the connector and position the control module.
|
3. |
4D/5D:
Reposition the right corner of the rear carpeting.
|
4. |
4D/5D:
Fit the right front seat
.
|