SAAB WIS ONLINE

PRE-RELEASE

Radio receiver, TMC, 5D

Radio receiver, TMC, 5D

To remove


1. Carry out procedures when replacing electronic components .

2. Remove left-hand rear side trim .

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Unplug the connectors for the radio receiver.

4. Remove the radio receiver.


To fit


1. Fit the radio receiver.

2. Plug in the connectors for the radio receiver.

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Fit left-hand rear side trim .


PRE-RELEASE