PRE-RELEASE
Charge regulator, replace, Z18XE
| Charge regulator, replace, Z18XE |
| To remove |
In the method described below, the generator has already been removed.
| 1. |
Remove the generator, see
Generator, remove and install, Z18XE
.
|
|
| 2. |
Remove the guard:
- Undo the bolts (1, 2) - Pull off the guard |
|
| 3. |
Remove the regulator:
- Undo the bolts (arrows) |
|
| To fit |
| 1. |
Fit the regulator:
- Tighten the bolt |
|
| 2. |
Fit the guard:
- Tighten the bolt |
|
| 3. |
Fit the generator, see
Generator, remove and install, Z18XE
.
|
|
| 4. |
When changing, check battery, see
Battery check
and charge battery if necessary, see "Charging the battery".
|
|
