PRE-RELEASE
Light cluster, boot lid
| Light cluster, boot lid |
| To remove |
| 1. |
Open the tailgate.
|
|
| 2. |
Remove the inner handle. Remove the trim clips.
|
|
| 3. |
US/CA: Detach the emergency handle from the trim. Detach the wire from the emergency handle.
|
|
| 4. |
Slightly bend aside the trim from the cover on the lock.
|
|
| 5. |
Loosen the trim guide clips and lift away the trim from the boot lid.
|
|
| 6. |
Remove the lamp housing nuts.
|
|
| 7. |
Separate the connector.
|
|
| 8. |
Remove the lamp housing.
|
|
| To fit |
| 1. |
Check the lamp housing gasket. Fit the lamp housing with nuts.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Lift up the trim.
US/CA: Insert the emergency handle through the trim. |
|
| 4. |
Position the trim at the lock cover and insert the guide clips. Press the guide clips into place.
|
|
| 5. |
Fit the clips and the inner handle.
|
|
| 6. |
US/CA: Attach the emergency handle to the wire. Fit the handle to the trim. Check the function of the emergency handle.
|
|
| 7. |
Close the boot lid.
|
|
