PRE-RELEASE
Light cluster, boot lid, CV
| Light cluster, boot lid, CV |
| To remove |
| 1. |
Remove the boot lid trim.
|
|
| 2. |
Unplug the light cluster connector.
|
|
| 3. |
Remove the light cluster nuts. Remove the light cluster.
|
|
| 4. |
If the light cluster is to be replaced, the fittings and bulbs must be transferred to the new lamp.
|
|
| To fit |
| 1. |
Make sure the seal is intact and in place. Put the light cluster in position. Fit and tighten the light cluster nuts.
|
|
| 2. |
Plug in the light cluster connector.
|
|
| 3. |
Refit the boot lid trim.
|
|
