PRE-RELEASE
Light cluster, rear, CV
| Light cluster, rear, CV |
| To remove |
| 1. |
Open the boot lid.
|
|
| 2. |
Remove the cover or bend aside the side trim from the luggage compartment.
|
|
| 3. |
Remove the nuts (4 off). Lift out the light cluster.
|
|
| 4. |
Undo the connector by pressing in the circlip.
|
|
| To fit |
| 1. |
Check that the gasket is whole and properly positioned.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Put the light cluster in place. Fit and tighten the nuts securing the light cluster.
|
|
| 4. |
Refit the cover or reposition the trim.
|
|
