PRE-RELEASE
(351-2697) SID message about lights being out of order
Symptom: SID message "left/right low beam failure" Diagnostic trouble codes in the UEC: B2575 04 "low beam left circuit open" B2699 04 "low beam right circuit open" B2880 04 "high beam left circuit open" B3866 04 "high beam right circuit open"
| TECHNICAL SERVICE BULLETIN | |
| Bulletin Nbr: | 351-2697 |
| Date: ........... | Maj 2008 |
| Market: | all |
| SID message about lights being out of order |
| Cars affected |
Saab 9-3 M06-M08 equipped with halogen lamps within the following Vehicle Identification Number ranges:
9-3 4D/5D: 61000001-81141499
9-3 CV: 66000001-86011395
| Background |
When the SID message "left/right low beam failure" or "left/right high beam failure" is shown, the lamp is broken in the majority of cases, but in some cases the message is shown due to a software fault in the UEC (electrical centre 342).
In the case of customer complaint, the following procedure must be carried out.
Symptom description
SID message "left/right low beam failure"Diagnostic trouble codes in the UEC:
B2575 04 "low beam left circuit open"
B2699 04 "low beam right circuit open"
B2880 04 "high beam left circuit open"
B3866 04 "high beam right circuit open"
| Parts required |
Not affected.
| Procedure |
| Note | ||
|
Bulbs or the UEC must not be replaced if the remedial action solves the problem. |
| 1. |
Connect Tech2 version 132.000 or later.
|
|
| 2. |
Connect to TIS 2000 edition 2007-2 update 2 or later.
|
|
| 3. |
Update the control module, UEC, with software 12783250.
|
|
| Warranty/Time Information |
In the case of customer complaint and if the car is within the warranty period , use the following information to fill out the claim:
Failed Object: 37170
Fault/Reason code: 67
Location code: 09 (US=9)
Warranty Type (US): 01
Repair/Action code: 05
Labour Operation (US): 3717011
Labour Operation (CA): N1897
Time: 0.3 hr
