PRE-RELEASE
Output shaft speed sensor, F40 manual gearbox (533)
| Output shaft speed sensor, F40 manual gearbox (533) |
| Location |
Gearbox, output shaft speed sensor (533)
| Main task |
To measure the speed of the output shaft in the gearbox. This value is used by the TCM.
| Type |
Magnetoresistance, Hall effect. Uses a tooth wheel with 18 teeth for measurement.
| Connection |
The sensor is supped with power from pin 33 (B) on the TCM and the signal from the sensor is received on pin 23 (B) on the TCM.
| Pin No. | Interface | Description |
| 33 (B) | Power supply | |
| 23 (B) | Signal from sensor |
