PRE-RELEASE
Level sensor, brake fluid reservoir, LHD
| Level sensor, brake fluid reservoir, LHD |
| To remove |
| 1. |
Open the bonnet.
|
|
| 2. |
Fit the wing cover onto the left-hand front wing.
|
|
| 3. |
B207:
Unplug the connector (A) for the coolant's level sensor.
|
|
| 4. |
B207:
Unplug the connector (A) for the sensor unit, combustion (CDM).
|
|
| 5. |
Undo the coolant reservoir from the bulkhead and lift it up.
|
|
| 6. |
B284:
Remove the
battery cover, lower section
.
|
|
| 7. |
B284:
Remove the heat shield's upper screw (A) and fold the heat shield forwards.
|
|
| 8. |
Unplug the connector (A) for the brake fluid reservoir's level sensor.
|
|
| 9. |
Remove the level sensor from the brake fluid reservoir.
|
|
| To fit |
| 1. |
Fit the level sensor to the brake fluid reservoir.
|
|
| 2. |
Plug in the connector (A) for the brake fluid reservoir's level sensor.
|
|
| 3. |
B284:
Fit the heat shield's upper screw (A).
|
|
| 4. |
B284:
Fit the
battery cover, lower section
.
|
|
| 5. |
Fit the coolant reservoir.
|
|
| 6. |
B207:
Plug in the connector (A) for the sensor unit, combustion (CDM).
|
|
| 7. |
B207:
Unplug the connector (A) for the coolant's level sensor.
|
|
| 8. |
Remove the wing cover from the left-hand front wing.
|
|
| 9. |
Close the bonnet.
|
|
| 10. |
B284:
Carry out
Procedures after disconnecting the battery
.
|
|
