PRE-RELEASE
Power steering pump, B207 petrol engine
| Power steering pump, B207 petrol engine |
| Important | ||
|
Scrupulous cleanliness must always be observed during all work with hydraulic components. |
||
| To remove |
| 1. |
Detach the return hose, wipe up any fluid spill with a cloth and plug the reservoir pipe using
82 92 955 Plugs, spare part kit
. Suspend the hose so that fluid does not run out.
|
|
| 2. |
Remove the electrical connection of the pressure sensor.
|
|
| 3. |
Remove the delivery pipe from the pump. Wipe up any oil spill with a cloth.
|
|
| 4. |
Remove the pump. Some engine oil may run out.
|
|
| 5. |
Empty the fluid from the pump.
|
|
| To fit |
| 1. |
Fit the pump using a new gasket.
Tightening torque 22 Nm (16 lbf ft) 
|
|
| 2. |
Connect the return hose.
|
|
| 3. |
Connect the delivery line using new gaskets.
Tightening torque 32 Nm (24 lbf ft) |
|
| 4. |
Connect the electrical connection of the pressure sensor.
|
|
| 5. |
Fill with fluid and
bleed the power steering system
. Check for leaks.
|
|
