PRE-RELEASE
Power steering return line, B207 LHD
| Power steering return line, B207 LHD |
| Important | ||
|
Scrupulous cleanliness must always be observed during all work with hydraulic components. |
||
| To remove |
| 1. |
Remove the driver-side wheel.
|
|
| 2. |
Open the reservoir cap.
|
|
| 3. |
Raise the car.
|
|
| 4. |
Disconnect the return line from the steering gear and allow the fluid to drain into a suitable receptacle.
|
|
| 5. |
Lower the car to the floor.
|
|
| 6. |
Remove the line from the reservoir.
|
|
| 7. |
Raise the car and pull our the line from under the car.
|
|
| To fit |
| 1. |
Fit the line in place.
|
|
| 2. |
Attach the line to the steering gear. Make sure the O-ring is correctly seated.
Tightening torque 28 Nm (21 lbf ft) 
|
|
| 3. |
Lower the car to the floor.
|
|
| 4. |
Attach the line to the power steering fluid reservoir.
|
|
| 5. |
Fill with fluid and
bleed the power steering system
.
|
|
| 6. |
Fit the
wheel
.
|
|
