PRE-RELEASE
Front bumper shell
| Front bumper shell |
| To remove |
| 1. |
Remove the upper radiator crossmember clips.
|
|
| 2. |
Raise the car.
|
|
| 3. |
Remove the bumper bolts in the wing liner.
|
|
| 4. |
Remove the spoiler shield. Unplug and remove the connectors.
Cars with headlight washer: Disconnect the washer hose. Suspend and seal as necessary. 
|
|
| 5. |
Pull the corner of the bumper shell loose from the holder mounting.
|
|
| 6. |
Lift off the bumper shell.
|
|
| To fit |
| 1. |
Check that the cellular block is correctly situated in the shell.
|
|
| 2. |
Position the bumper. Press the shell back and press the shell clips into the holder.
|
|
| 3. |
Fit the bumper bolts to the wing liner.
|
|
| 4. |
Fit the clips to the upper radiator crossmember.
|
|
| 5. |
Fit the spoiler guard. Plug in the connectors.
Cars with headlight washer: Fit the washer hose. 
|
|
| 6. |
Lower the car and check the fit of the bumper shell.
|
|
