PRE-RELEASE
Insulation, bonnet
| Insulation, bonnet |
| To remove |
| 1. |
Open the bonnet.
|
|
| 2. |
Clips with screw:
Remove the bonnet insulation clips by unscrewing the centre screw. Pull the clips directly outward.
Clips with hole Insert 84 71 179 Removal tool, clips under the clip. Insert a 1.5 mm allen key with ball into the hole and release the clip. Pull out the clip. |
|
| 3. |
Release the insulation from the hooks on the back edge of the bonnet.
|
|
| To fit |
| 1. |
Fit the insulation onto the hooks on the back edge of the bonnet.
|
|
| 2. |
Centre the insulation so that the clip holes align.
|
|
| 3. |
Clips with screw:
Fit the clips and press in the centre screws.
Clips with hole: Fit the clips. |
|
| 4. |
Close the bonnet.
|
|
