PRE-RELEASE
Floor console, with UHP connection
| Floor console, with UHP connection |
| To remove |
| 1. |
Remove the floor console:
|
|
| • |
Move the front seats to their rear position.
|
| • |
Remove the forward side panels (A).
|
| • |
Move the front seats to their front position.
|
| • |
Remove the rear cover panel (B) by pulling it out and back.
|
| • |
Lift the hook (C) and remove the rear side panels by pulling them out and back.
|
| • |
Move the front seats to their rear position.
|
| • |
Remove the cover (D), use
82 93 474 Removal tool
in the rear edge of the cover and pull back.
|
| • |
Man:
Remove the gear lever gaiter from the cover.
|
| • |
Aut:
Remove the cradle (F).
|
| • |
Apply the handbrake and remove the cover (G) under the handbrake by pulling the cover straight out.
|
| • |
Remove the cover on the passenger side by clamping the cover together and lifting up.
|
| • |
Remove the box under the passenger side's cover (H).
|
| • |
Remove
Phone cradle, UHP
.
|
| • |
Remove the rubber mat in the floor console's storage box. Remove the floor console's screws (I).
|
|||||||
| • |
Aut:
Place the selector lever in position
N
.
|
| • |
Unhook the air duct from the floor console's rear mounting.
|
| • |
Remove the cable tie (J) from the floor console.
|
| • |
Unplug the connectors (K) from the ignition switch and the 12 V socket. Remove the cable ties (L).
|
| • |
Lift the console up and back.
|
| To fit |
| 1. |
Fit the floor console:
|
|
| • |
Position the floor console.
|
| • |
Plug in the connectors (K) for the ignition switch and the 12 V socket. Fit the cable ties (L).
|
| • |
Fit the cable tie (J) for the floor console.
|
| • |
Hook the air duct in the floor console's rear mounting.
|
| • |
Fit the floor console's screws (I) and fit the rubber mat in the floor console's storage box.
|
|||||||
| • |
Fit
Phone cradle, UHP (375c)
.
|
| • |
Fit the box under the passenger side's cover and fit the cover (H).
|
| • |
Fit the cover (G) under the handbrake.
|
| • |
Aut:
Fit the cradle (F) and the cover (D).
|
| • |
Man:
Fit the gear lever gaiter and the cover.
|
| • |
Fit the rear side panels (C).
|
| • |
Fit the rear cover (B).
|
| • |
Fit the forward side panels (A).
|
