PRE-RELEASE
Window frame cover, rear
| Window frame cover, rear |
| To remove |
| 1. |
Open the window fully.
|
|
| 2. |
Remove
Rear door trim
.
|
|
| 3. |
Carefully free the lower part of the centre leg of the frame cover.
|
|
| 4. |
Free the lower front section of the frame cover. Carefully free the end part and pull it backwards so that the frame cover is released from the front corner of the door frame.
|
|
| 5. |
Release the rest of the cover by pulling it straight out.
|
|
| To fit |
| 1. |
Fit the window frame cover by first locating it in the front corner of the door frame and then attaching the lower front section of the cover .
|
|
| 2. |
Attach the rear section and the centre leg of the cover. Ensure that the rubber strip is correctly located.
|
|
| 3. |
Fit
Rear door trim
.
|
|
| 4. |
Close the rear door window.
|
|
| 5. |
Cars with pinch protection
: Perform
Programming of the pinch protection
.
|
|
