PRE-RELEASE
Rear inertia reel, 5D
| Rear inertia reel, 5D |
| To remove |
| 1. |
Remove
C-pillar trim, 5D
.
|
|
| 2. |
Remove
Rear seat cushion, 4D, 5D
|
|
| 3. |
Remove
Side bolster, 5D
.
|
|
| 4. |
Remove
Rear side trim, 5D
.
|
|
| 5. |
Remove the lower seatbelt anchor point.
|
|
| 6. |
Remove the upper seatbelt anchor point.
|
|
| 7. |
Dismantle the inertia reel and lift out the inertia reel.
|
|
| To fit |
| 1. |
Fit the inertia reel by putting it into position.
Tightening torque 37 Nm (27 lbf ft) 
|
|
| 2. |
Fit the upper seatbelt anchor point.
Tightening torque 37 Nm (27 lbf ft) |
|
| 3. |
Fit the lower seatbelt anchor point. Make sure the belt is
not
twisted.
Tightening torque 37 Nm (27 lbf ft) 
|
|
| 4. |
Fit
Rear seat cushion, 4D, 5D
|
|
| 5. |
Fit
Rear side trim, 5D
.
|
|
| 6. |
Fit
Side blister, 5D
. Insert the belt into the mounting.
|
|
| 7. |
Fit
C-pillar trim, 5D
.
|
|
| 8. |
Check that the belt is positioned correctly and not twisted.
|
|
| 9. |
Check the operation of the seat belt.
|
|
