PRE-RELEASE
Upholstery, rear backrest, 4D
| Upholstery, rear backrest, 4D |
| Removing |
| 1. |
Remove the 60% part of the backrest
from the rear seat.
|
|
| 2. |
Remove the head restraint supports
.
|
|
| 3. |
Remove the armrest
from the backrest 60% part.
|
|
| 4. |
Remove the backrest belt guide.
|
|
| 5. |
Remove the sprung backrest catch.
|
|
| 6. |
Remove the through-load hatch frame.
|
|
| 7. |
Remove the upholstery strips from the backrest.
|
|
| 8. |
Remove the through-load hatch by undoing the locating pins at the lower edge of the backrest.
|
|
| 9. |
Carefully pull the upholstery off the foam backrest cushion.
|
|
| Fitting |
| 1. |
Fit the upholstery to the foam backrest cushion.
|
|
| 2. |
Fit the through-load hatch.
|
|
| 3. |
Fit the backrest upholstery strips. Make sure the upholstery is properly stretched.
|
|
| 4. |
Fit the through-load hatch frame.
|
|
| 5. |
Fit the sprung backrest catch.
|
|
| 6. |
Fit the seatbelt guide to the backrest.
|
|
| 7. |
Fit the armrest
to the backrest 60% part.
|
|
| 8. |
Fit the head restraint supports
and head restraint. Ensure that head restraint support catches engage properly.
|
|
| 9. |
Fit the backrest 60% part
to the rear seat.
|
|
