PRE-RELEASE
Camshaft sealing ring
| Camshaft sealing ring |
| To remove |
| 1. |
Remove
Timing belt in-car Z19DTH
,
Timing belt in-car Z19DT
or
Timing belt in-car, Z19DTR
.
|
|
| 2. |
Remove the camshaft drive wheels.
|
|
| 3. |
Remove the exhaust camshaft sealing ring with a suitable tool. Take care not to damage the sealing surface.
|
|
| To fit |
| 1. |
Lubricate the sealing ring with
90 167 353 Silicone paste
.
Fit the camshaft sealing ring with 32 025 050 Fitting tool, camshaft seal . 
|
|
| 2. |
Fit the camshaft drive wheels with new bolt. Screw in the bolt loosely so that it is pressing against the drive wheel but so the drive wheel can still be turned in relation to the exhaust camshaft. The exhaust camshaft must be locked with
32 025 008 Fixing tool, camshaft
.
|
|
| 3. |
Fit
Timing belt in-car Z19DTH
,
Timing belt in-car Z19DT
or
Timing belt in-car Z19DTR
. Before removing
32 025 008 Camshaft fixing tool
, tighten the bolt of the camshafts' drive wheel once the timing belt has been adjusted. The drive wheel must not twist when the bolt is tightened.
Tightening torque 120 Nm (89 lbf ft). |
|
