PRE-RELEASE
Check compression, Z19DTR
| Check compression, Z19DTR |
| Checks |
| 1. |
Remove
Glow plug (398), Z19DTR
.
|
|
| 2. |
Fit
32 025 018 Adapter, compression test
to cylinder 1.
|
|
| 3. |
Connect the compression gauge using a measuring range between 10 and 40 bar to the adapter.
|
|
| 4. |
Run the starter motor at a speed of at least 200 rpm until the pointer on the compression gauge has stopped rising.
|
|
| 5. |
Remove the compression gauge and the adapter.
|
|
| 6. |
Measure the compression on cylinder 2-4.
|
|
| 7. |
The maximum pressure difference allowed between cylinders is 150 hPa (1.5 bar).
|
|
| 8. |
Fit
Glow plug (398), Z19DTR
.
|
|
