Pressure sensor, particle trap (744), Z19DTH
|
|
Pressure sensor, particle trap (744), Z19DTH
|
|
1.
|
Remove the upper engine cover and insulation.
|
|
2.
|
Remove the pressure sensor connector.
|
|
3.
|
Remove the delivery hoses.
|
|
4.
|
Remove the pressure switch by undoing the screw.
|
|
1.
|
Fit the pressure switch with the screw.
|
|
2.
|
Fit the delivery hoses.
|
|
3.
|
Fit the pressure sensor connector.
|
|
4.
|
Fit the insulation and the upper engine cover.
|
|
5.
|
If a new pressure sensor is fitted
: Connect the diagnostic tool to reset adaptation values. Select Menu - Engine - Engine management system - Adjustment -
Particle Filt. Pressure Sens. Repl.
|
