PRE-RELEASE
Belt tensioner
| Belt tensioner |
| To remove |
| 1. |
Remove
Drive belt, auxiliaries
.
|
|
| 2. |
Remove the pipe running to the mass air flow sensor.
|
|
| 3. |
Remove the upper engine cover.
|
|
| 4. |
Remove the upper turbocharger delivery pipe.
|
|
| 5. |
Remove the bolts of the front turbocharger delivery pipe.
|
|
| 6. |
Raise the car.
|
|
| 7. |
Detach the turbocharger delivery pipe from the hose and the A/C compressor.
|
|
| 8. |
Lower the car.
|
|
| 9. |
Remove the battery cover.
|
|
| 10. |
Remove the battery coolant pipe.
|
|
| 11. |
Remove the upper radiator mountings.
|
|
| 12. |
Press the radiator assembly forward and remove the front turbocharger delivery pipe.
|
|
| 13. |
Remove the lower bolt of the power steering pump.
|
|
| 14. |
Slightly loosen the upper bolts of the power steering pump.
|
|
| 15. |
Remove the power steering pump.
|
|
| 16. |
Remove the bolts holding the cable duct in place.
|
|
| 17. |
Remove the belt tensioner.
|
|
| To fit |
| 1. |
Fit the belt tensioner.
Tightening torque 22 Nm (16 lbf ft) 
|
|
| 2. |
Fit the cable duct.
|
|
| 3. |
Reposition and fasten the power steering pump.
Tightening torque 22 Nm (16 lbf ft) 
|
|
| 4. |
Press the radiator assembly forward and fit the front turbocharger delivery pipe. Do not tighten yet.
|
|
| 5. |
Raise the car.
|
|
| 6. |
Fit the turbocharger delivery pipe to the A/C compressor and fit the delivery hose.
|
|
| 7. |
Lower the car.
|
|
| 8. |
Tighten the delivery pipe bolts.
|
|
| 9. |
Fit the upper turbocharger delivery pipe.
|
|
| 10. |
Fit the upper radiator mountings.
|
|
| 11. |
Fit the battery coolant pipe.
|
|
| 12. |
Fit the battery cover.
|
|
| 13. |
Attach the pipe to the mass air flow sensor.
|
|
| 14. |
Fit the upper engine cover.
|
|
| 15. |
Fit
Drive belt, auxiliaries
.
|
|
