PRE-RELEASE
Knock sensor, front cylinder bank (516F)
| Knock sensor, front cylinder bank (516F) |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Remove the secondary air injection pump.
|
|
| 3. |
Remove the knock sensor.
|
|
| 4. |
Unplug the knock sensor connector.
|
|
| To fit |
| 1. |
Plug in the connector.
|
|
| 2. |
Fit the knock sensor at the angle illustrated and tighten it to the correct torque.
Tightening torque 23 Nm (17 lbf ft) 
|
|
| 3. |
Fit the secondary air injection pump
.
|
|
| 4. |
Lower the car.
|
|
