PRE-RELEASE
Reversing light switch, 4WD
Reversing light switch, 4WD |
To remove |
1. |
Raise the car.
|
2. |
Unplug the connector (A).
|
3. |
Remove the reversing light switch (B).
|
To fit |
1. |
Fit the reversing light switch (B) with a new sealing ring.
Tightening torque 20 Nm (15 lbf ft) |
2. |
Plug in the connector (A).
|
3. |
Lower the car.
|