PRE-RELEASE
AFL control module (752)
| AFL control module (752) |
| Main task |
The AFL control module has the same functions as AHL control module (664) plus curve lighting.
When vehicle speed exceeds approx. 10 km/h the headlamps will be angled slightly when the steering wheel is turned. The light can be angled maximum 15° to the right or left compared to a car with standard headlamps.
The control system is equipped with two load angles sensors located at the front and rear axles. The system uses information from the steering angle sensor.
| Type |
The control module has a microprocessor with clock, RAM memory and a flashable ROM. An internal bus connects the processor and memories with the I/O unit. The I/O unit is responsible for loading the values from the A/D converter for analogue inputs, digital inputs on the bus and for activating the transistors in the power amplifiers. For a general description of vehicle control modules, see Control modules, general description .
| Power supply, ground and bus communication |
|
Pin No.
|
Signal type
|
Description
|
| 1 | P-bus + | Signal to/from other control modules |
| 2 | P-bus - | Signal to/from other control modules |
| 19 | Power supply +15 | From UEC |
| 20 | Ground | Grounding point G2 |
