PRE-RELEASE

Bootlid lock microswitch (622)

Location

Bootlid lock microswitch (622)

Main task

Used to open the bootlid from the outside.

Type

The switch contains a single pole breaker. When the handle is not touched the breaker is open. When the handle is pushed in the switch makes.

Connect

Pin	Signal type	Description
3	Power supply 10.2V	Via an integrated resistor in BCM of 1.5kΩ
4	Ground	From REC

The control module input is digital. A voltage above 2V is interpreted as an open circuit while lower than 2V is interpreted as closed.

Diagram 4D

Diagram 5D

Diagram CV