PRE-RELEASE
Track rod, inner, B284, 4WD
| Track rod, inner, B284, 4WD |
| To remove |
| 1. |
Remove the front wheel.
|
|
| 2. |
Remove
bellows, steering gear
.
|
|
| 3. |
Bend up the lock tabs (A) and remove the track rod (B) using tool
KKM-6247 Special wrench
or a 32 mm crow's foot wrench.
|
|
| To fit |
| 1. |
Fit the locking washer (A).
|
|
| 2. |
Fit and fasten the track rod (A). Bend in the lock tab (B) toward the inner ball joint.
Tightening torque 90 Nm (66 lbf ft) 
|
|
| 3. |
Fit
bellows, steering gear
.
|
|
| 4. |
Fit the
wheel
.
|
|
| 5. |
Check
Wheel geometry
and adjust if necessary, see
Wheel alignment
.
|
|
